Guides
Updated 19 November 2026
Short, practical answers to the questions that come up when you design 3D prints in OpenSCAD on a Mac: setting up OpenSCAD and its libraries, working with an AI agent such as Claude Code, making models people can adjust, getting parts to fit, and checking a print before it goes to the slicer. Each guide starts with the answer, then the steps.
Getting started
How to install OpenSCAD on a Mac
Install a development snapshot, 2024.01 or newer, with Homebrew or from openscad.org.
How to use OpenSCAD with Claude Code
Add ScadBox's MCP server to Claude Code, then let Claude render, look at, check and export your designs.
How to install BOSL2 for OpenSCAD on a Mac
Put the BOSL2 folder in ~/Documents/OpenSCAD/libraries and include <BOSL2/std.scad>, or install it from ScadBox in one click.
Designing
How to make a parametric OpenSCAD model with customizer sliders
A description comment above each variable, a range comment like // [20:1:200] after it, and /* [Group] */ headings.
How to measure an object from a photo for a 3D model
Scale from something of known size in the photo: two points, a row of evenly spaced features, or a card's four corners.
What tolerance to use for 3D printed parts that fit together
0.3 mm per side to slide, 0.1 mm per side to press, +0.2 mm on holes, then measure your own printer.
How to design a 3D printed stand that won't tip over
Keep the combined centre of mass well inside the footprint, aim for 20° of tilt before tipping, and check every contact in a stack.
Printing
How to check a 3D print before slicing
Bed fit, supports and whether they come out, thin walls, the best way up, hanging and pauses.
How to print two colours with one nozzle (filament change)
Stack the colours by height and change filament at the first layer of the new colour.