A snap-fit box, any size
A box with a lid that snaps on. Every size is a slider, and the snap and sliding fits come from your printer profile, so a lid printed on your printer clicks on firmly without forcing.
Drag a slider
The model updates as you drag, and the new value is written back into the code.
Two ways to make it yours
Ask your AI agent, or change it yourself in the editor. Here's what each looks like for this design.
With your AI agent
A small box with a snap-on lid for SD cards, 60 × 40 × 30 mm inside.
Your agent works through ScadBox's tools, for example:
get_templatestarts from the snap-fit boxget_printer_profileuses your printer's snap and sliding fitsrender · snapshotchecks the lid seats on the boxexportbox and lid, laid out to print
Then keep going in plain words:
Make a long version for pencils.
In the editor
- Drag the sliders: width, depth, height and corner radius update as you drag
- Tune the snap: how firmly it clicks is a slider
- Undo anything: every change is written back into the code, so undo works
Any size
layout = "assembled"
inner_w = 190, inner_d = 40, inner_h = 25, layout = "assembled"
inner_w = 80, inner_d = 80, inner_h = 80, corner_r = 0, layout = "assembled"More case studies

Two-storey house
Walls, rooms and furniture from data tables, with cut-away, exploded and floor-plan views, a printable kit, and a gate and garage door that open.

Guitar pedal
A retro wedge pedal with holes for real jacks, pots and a 3PDT footswitch, a battery door, printed knobs, inlaid artwork and assembly instructions.

Self-closing deck box
A hinged lid that falls shut under its own weight and snaps closed on magnets, with inlaid lettering and a hinge stop.