Case studies

A screw-top jar with real threads

A jar with a threaded neck and a lid that screws on, built with BOSL2's thread library. Inside diameter, height, wall and thread pitch are sliders, and the thread's clearance comes from your printer's fit, so the lid turns smoothly without wobbling.

One-click BOSL2Printer fitsAssembly stepsCustomizer sliders

Any size

Two ways to make it yours

Ask your AI agent, or change it yourself in the editor. Here's what each looks like for this design.

With your AI agent

I need a screw-top jar for spices, 50 mm across inside and 60 mm tall, with a lid that screws on smoothly. Use BOSL2 for the thread.

Your agent works through ScadBox's tools, for example:

  1. libraries installs BOSL2 if it isn't there
  2. get_template starts from the screw-top jar template
  3. get_printer_profile uses your sliding fit for the thread clearance
  4. render · section cuts through the thread to check it engages
  5. export jar and lid, each the right way up

Then keep going in plain words:

Make a set of four in different heights.

In the editor

  1. Size it: inside diameter, height, wall and floor are sliders
  2. Change the thread: pitch and thread height are sliders; the lid follows
  3. Check the fit: the thread clearance comes from your printer's fit test

Assembly